Tabla de contenido
Publicidad
•
Turn face away from valve outlet when opening cylinder valve.
•
Keep protective cap in place over valve except when cylinder is in use or
connected for use.
•
Read and follow instructions on compressed gas cylinders, associated
equipment, and CGA publication P-1 listed in Safety Standards.
1.3 A
dditional Symbols for Installation, Operation, and
Maintenance
F
IRE OR EXPLOSION hazard.
• Do not install or p
• Do not install unit near flammables.
• Do not overload building wiring – be sure power supply
FALLING UNIT can cause injury.
• Use lifting eye to lift unit onl
• Use equipment of adequate capacity to lift and support unit.
• If using lift forks to move unit, be sure forks are long enoug
OVERUSE c
an cause OVERHEATING
• Allow cool
• Reduce current or duty cycle before starting to weld
• Do not block or filter airflow to unit.
STATIC (ESD) can damage PC boards.
• Put on grounded wrist strap BEFORE handling boards or p
• Use proper static-proof bags and boxes to store, move, or ship
surfaces.
is properly sized, rated, and protected to handle this u
or any other accessories.
extend beyond opposite side of unit.
ing period; follow rated duty cycle.
PC
boards.
lace unit on, over, or near combustible
y, NOT running gear, gas cylinders,
1‐7
system
nit.
h to
again.
arts.
Publicidad
Tabla de contenido
Solución de problemas
