Closed Caption System - Sylvania 3819LC El Manual Del Propietario

CLOSED CAPTION SYSTEM

You can view specially labeled (cc) TV programs,
movies, news, pre-recorded tapes with either a dialogue
caption or text display.
CAPTION mode: By choosing the caption mode, you
can watch dramas, movies and news while
captioning the dialogues and the contents of news.
By choosing the text mode, you can watch
TEXT mode:
half screen text information if you want.
You may get these captions or text information by
1-2:
selecting either "1" or "2". Caption "2" is used, usu-
ally for a second language if available.
NOTE:
Not all programs are broadcast with closed captions.
Your television is designed to provide error free closed
captions from high quality antenna, cable and VCR sig-
nals. Conversely, poor quality signals are likely to result
in caption errors or no captions at all. Common signal
conditions which may cause captions errors are listed
below:
Automobile ignition noise
Electric motor brush noise
Weak snowy reception on TV screen
Multiplex signal reception displaying picture ghosts
or airplane flutter.
Playback of poorly recorded or worn VCR tapes.
NOTE:
If the TV/VCR displays a black
box on the TV screen, this means
that the TV/VCR is set to the
TEXT mode. To clear screen, se-
lect [CAPTION1], [CAPTION2]
or [OFF].
Make sure ...
Use the remote control for this procedure.
TV/VCR power must be turned on.
1
Select "CAPTION"
Press the MENU button.
Press the PLAY/
button to point to
"CAPTION".
2
Select your desired caption menu
Press the F.FWD/B or REW/s
button until your desired caption
menu appears.
([CAPTION1], [CAPTION2],
[TEXT1] or [TEXT2])
3
Exit the caption setting mode
Press the MENU button to return to TV mode.
TO CANCEL THE CLOSED CAPTION
SYSTEM
Repeat steps [1] and [2], select [OFF] using the
F.FWD/B or REW/s button. Press the MENU button
to return to TV mode.
WHEN THE CLOSED CAPTION MODE
IS ON
The On-Screen Display will disappear after 5 seconds.
This is also true when the MUTE button is pressed,
and when the PAUSE/STILL button is pressed while
recording.
If there is a power failure of any kind, the unit will
retain its' memory for this feature.
- 18 -
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
or STOP/
SETTING CLOCK
CHANNEL SET UP
USER'S SET UP
LANGUAGE [ENGLISH]
B
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
USER'S SET UP
LANGUAGE [ENGLISH]
B
CAPTION [CAPTION1]
ZERO RETURN
TIME SEARCH
EN
7L01