Bio Bronpi PE-130 Instrucciones De Instalacion Y Uso página 8

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

IMPORTANT! It is possible to use only one remote central unit for the same
installation, and there is no way to connect a second unit.
3
HANDLING THE REMOTE CENTRAL UNIT
The remote central unit allows making some kind of changes or modifications in the
USER MENU, taking into account that the handling of the buttons of the control are
set in this way:
-
Button 1: It allows decreasing or changing the value of the parameter chosen.
-
Button 2: It allows moving up inside the main menu.
-
Button 3: It allows increasing or changing the value of the parameter chosen.
-
Button 4: It allows moving down inside the main menu.
-
Button 5 (ENTER): It allows the access to the main menu and/or the submenu
chosen.
-
Button 6 (ESC): It allows switch on and off the stove/boiler by pressing this
button for 4 seconds. It allows coming out to the main menu from a submenu
or to the home screen.
This document is supplementary to the use manual that you can find inside your
heating equipment, so in order to know the different working options available must
keep in mind the aforesaid document.
Depending on the model of stove/boiler you have purchased, you will take
into account that:
-
If you have purchased any of the following models: HYDROPOLAR-21, HYDROALASKA-21, CARLOTA HYDRO, HYDROARTICA-27,
HYDROBALTICA-27, KARINA HYDRO, HYDROARTICA-34 or HYDROBALTICA-34, you have the possibility to choose any of the fuel
types, TYPE 1, TYPE 2 or TYPE 3.
-
If you have purchased the model HYDROPLUS-28, you have the possibility to choose the TYPE 1 or TYPE 2, but TYPE 3 is disabled. In
case of choosing it, for any circumstance, as fuels the TYPE 3 you must keep in mind that in that moment the stove/boiler will work with
parameters of TYPE 1.
-
If you have purchased any of the following models: OMEGA HYDRO, LETICIA HYDRO, DAMA HYDRO, REYNA HYDRO or REYNA
HYDRO-C, you only have the possibility of using the fuel type: TYPE 1, but TYPE 2 and TYPE 3 are disabled. In case of choosing, for
any circumstance, as a fuel TYPE 2 or TYPE 3 you must keep in mind that in that moment the stove/boiler will work with parameters
of TYPE 1, it means under the control of the working parameters of the equipment. Likewise, you will see that you have the option of
choosing the season; this function is disabled for this kind of stoves/boilers.
In case that the unit can be managed under an external thermostat, ambient probe or water probe, the messages showed in the screen will
vary depending on the chosen option.
INSTALLATION AND OPERATING INSTRUCTIONS
9
REMOTE CENTROL UNIT PE-130

Publicidad

Tabla de contenido
loading

Productos relacionados para Bio Bronpi PE-130

Tabla de contenido