Ferm FKB-13/500K Manual De Instrucciones página 5

36
SWITCH FOR PERCUSSION DRILLING
Fig.E
With the switch on top of the machine you can select
normal or percussion drilling.
• Slide the switch to the "Drill" symbol for normal
drilling.
• Slide the switch to the "Hammer" symbol for
percussion drilling.
MALFUNCTION
Below we have listed a number of possible causes and
corresponding solutions in case the machine does not
function as it should:
1. Excessive sparkling
• This usely indicates dirt in the motor or worndown
carbon brushes.
Bring your percussion drill to your Ferm-dealer.
2. The percussion drill is overheating
• The ventilationslots are covered with dirt.
Clean them with a dry cloth.
• The percussion drill is overloaded.
Use the machine for work for which it is ment to be.
Replace the drill for a sharp one or sharpen the drill by
using a benchgrinder and a twist drill grinding
attachment.
• The motor is defect.
Bring your percussion drill to your Ferm-dealer for
repairance.
5. MAINTENANCE
Make sure that the machine is not live when
carrying out maintenance work on the motor.
The Ferm machines have been designed to operate over
a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon
proper machine care and regular cleaning.
CLEANING
Regularly clean the machine housing with a soft cloth,
preferably after each use. Keep the ventilation slots free
from dust and dirt. If the dirt does not come off use a soft
cloth moistened with soapy water. Never use solvents
such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
LUBRICATION
The machine requires no additional lubrication.
FAULTS
Should a fault occur, e.g. after wear of a part, please
contact the service address on the warranty card. In the
back of this manual you find an exploded view showing
the parts that can be ordered.
ENVIRONMENT
To prevent damage during transport, the appliance is
delivered in a solid packaging which consists largely of
reusable material. Therefore please make use of options
for recycling the packaging.
Ferm Ferm
Faulty and/or discarded electrical or electronic
apparatus have to be collected at the appropriate
recycling locations.
GUARANTEE
The guarantee conditions can be found on the separately
enclosed guarantee card.
ı
( UK )
CE
DECLARATION OF CONFORMITY
We declare under our sole responsibility that this
product is in conformity with the following
standards or standardized documents
EN50144-1, EN50144-2-1, EN55014-1,
EN55014-2, EN61000-3-2, EN61000-3-3
in accordance with the regulations.
98/37/EEC, 73/23/EEC, 89/336/EEC
from 01-03-2004
ZWOLLE NL
W. Kamphof
Quality department
5