Installation And Electrical Connection - Berker 7531 20 08 Instrucciones Para El Uso

Information for qualified electricians
DANGER
Electric shock in case of accidental contact with live
parts. Electric shocks may be fatal.
Before working on the device, disconnect the mains
voltage and cover up live parts in the surroundings.

Installation and electrical connection

Installation of the device
Observe the admissible temperature range. Ensure sufficient cooling.
Snap the device onto a DIN EN 60715 mounting rail. The con-

necting terminals must be at the top.
Connection of the device
Observe the admissible loads.
Do not connect three-phase AC motors to the actuator.
On delivery, the switching state is undefined.
Set the relays to the OFF position.

Connect as shown in the example (Fig. 2).

GB
25