Publicidad
MAINTENANCE AND OIL ChANGE
Observe the oil: when it turns brown or toas-
ted, change it. Switch on the machine for
one minute, to fluidize the oil by tempera-
ture. Using the Allen wrench, open first the
upper lid, then the oil pan bottom lid. Tilt
the machine to let out all the oil and solid
residue.
Dispose in waist oils. Close the bottom lid
and refill the machine with Vacuum pro oil
until it reaches the half of the sight glass
(approx. 60 ml). If the sight glass is really
dirty, take it out with a wrench, clean it and
put it back.
INSTRUCTIONS
Plug the machine. Prepare the container
with valve, checking that the valve is in the
correct position. Connect the fast connec-
tion tube to the pump, pushing until it is
blocked. Place the nozzle on the valve and
switch on the pump.
Check the vacuum level in the vacuometer.
Switch off.
To separate the nozzle from the valve, push
down the ring of the fast connection. Due
to vacuum loss in the tube, the nozzle will
automatically disconnect.
VACUUM PRO
7
Publicidad
