Refrigerator Shelves; Door Bins; Lights; Care And Cleaning - KitchenAid KURR214KSB Guía De Uso Y Cuidados E Instrucciones De Instalación

Rattling noises may come from the fl ow of refrigerant or
items stored inside the refrigerator.
As each cycle ends, you may hear a gurgling sound due
to the refrigerant fl owing in your refrigerator.
You may hear water running into the drain pan when the
refrigerator is defrosting.
You may hear clicking sounds when the refrigerator starts
or stops running.

Refrigerator Shelves

To remove or adjust upper shelves:
1. Remove the shelf by lifting it up and out of the shelf
brackets.
2. Replace the shelf by inserting it into the shelf brackets.
NOTE: Be sure the shelf is leveled.
To remove and replace bottom shelf:
1. The very bottom glass shelf slides straight out.
2. Replace the shelf by aligning the edges with the guides
and pushing it in toward the back of the refrigerator.
Door Bins (Solid Door Models)
Your refrigerator has two door bin locations for maximum
storage capacity.
To remove and replace the door bins:
1. Remove the door bin by tilting it forward and pulling it out.
2. Replace the bin by placing the rear of the bin under the
support on the door and sliding into place.
The refrigerator has an interior light that illuminates when the
door is opened.
NOTE: The light is an LED which does not need to be
replaced. If the LED does not illuminate when the door is
opened, call Service. Refer "Assistance" section for contact
information.

CARE AND CLEANING

Cleaning

Explosion Hazard
Risk of fire or explosion.
Flammable refrigerant used.
Do not use mechanical devices to defrost refrigerator.
Do not puncture refrigerant tubing.
Clean the refrigerator once a month to avoid buildup of
odors. Wipe up spills immediately.
To clean your refrigerator:
1. Unplug refrigerator or disconnect power.
2. Remove all shelves and bins from inside the refrigerator.

Lights

9