Intellinet 508209 Manual De Instrucciones página 3

Gigabit PoE+ Media Converter
If a copper connection breaks when the LFP function is enabled, the converter's
Link Loss Carry Forward (LLCF) feature stops data transmission and generates
a trap to a management station. Likewise, if a fiber connection breaks when the
LFP function is enabled, the converter's Link Loss Return (LLR) function will
return a no-link condition to its link partner and cease data transmission.
Power over Ethernet+
The Intellinet Gigabit PoE+ Media Converter complies with IEEE 802.3at / 802.3af
standards. When the included power adapter is connected to the converter, the
device can supply up to 30 watts of power to a PoE-compliant powered device.
When the 10M DIP switch is ON, PoE can be extended up to 330 m (1082 ft.) and
data transfer is reduced to 10 Mbps.
LED Status
LED
PWR
1000M
FP Link/
ACT
TP Link/
ACT
PoE
SD
STATUS
Off
On
On
Off
On
Flashing
Off
On
Flashing
Off
On
Off No power is being supplied to a connected PD.
On
Off
STATUS DESCRIPTION
Power Off
Gigabit connection
Less than Gigabit connection
Active fiber connection
Fiber data transfer
Port link is down.
Active copper connection
Copper data transfer
Port link is down.
PoE is being supplied to a connected PD.
Valid optical signal
No valid optical signal
Power On
English
3