Serial Communications - Tripp-Lite SMX Manual De Operación

201203252 93-2745.qxd
Quick Installation
These connections are optional. Your UPS will function properly without these connections.

Serial Communications

1
(Select models only)
If your UPS has a DB9 port, you can connect it
to the DB9 port of a computer with the included
cable. Use with Tripp Lite's PowerAlert
Software for automatic files saves and safe
shutdown in case of power failure. (See Basic
Operation Section.)
USB Communications
2
Connect the USB port of your UPS to the USB
port of a computer with the included cable. Use
with Tripp Lite's PowerAlert Software for auto-
matic files saves and safe shutdown in case of
power failure. (See Basic Operation Section.)
Tel/DSL Protection
3
(Select Models Only)
Using telephone cords, connect your wall jack
to the UPS jack marked "LINE" (or "IN") and
your equipment to the UPS jack marked
"EQUIP" (or "OUT"). This will protect your
equipment from surges over the phone line, but
you should make sure that your equipment is
also protected against surges on the AC line.
External Batteries
4
(Select Models Only)
External batteries are only needed to extend
runtime. Adding external batteries will increase
recharge time as well as runtime. Complete
installation and mounting instructions for your
battery pack appear in the battery pack's
owner's manual. Make sure that cables are fully
inserted into their connectors. Small sparks may
result during battery connection; this is normal.
4/3/2012 3:52 PM Page 4
optional
4
NORM DELAY
1
NORM DELAY
2
NORM DELAY
3
NORM
4
DELAY