Mounting On Extractor Hood; Mounting On The Motor Housing - PlasmaMade GUC 1214 Manual Del Usuario

9. Mounting instructions (wall & island)

Mounting on extractor hood

The chimney extractor hood must be installed according to the guidelines for
recirculation – for this, see the manual for your extractor hood.

Mounting on the motor housing

Mount the PlasmaMade Airfilter carefully and level on the motor housing using the
eccentric mounting adapter. Use the ø 2.9 x 19 mm screws to mount the eccentric
mounting adaptor on the motor housing and to clamp the PlasmaMade Airfilter. Put the
mains adapter into the PlasmaMade Airfilter (on the top) and plug into the socket.
After activating the extractor hood motor the filter starts to operate automatically.
11