Setting the Radio
Only 20 Presets can be saved at any one time.
1. Un- tie the FM antenna cable and position the antenna as high up as possible.
2. Turn on the i-Station Tower and select the FM Radio via the Source button.
3. Using the 'TUNE- / TUNE+' buttons on the i-Station Tower/Remote Control set the required radio frequency.
(Pressing the 'TUNE- / TUNE+' button once will manually Tune the radio, Press and Hold the 'Tuning' button
will Auto search the radio)
4. Press the 'Set' button on the i-Station Tower or the 'Mem' button on the Remote Control (Channel number
will then flash)
5. Using the 'Tune - / Tune +' buttons select the Channel number you wish to save the radio station to.
6. Press the 'Set' button on the i-Station Tower or the 'MEM' button on the Remote Control to save the settings.
Note: In the setting mode if no buttons are pressed for 5 seconds the display will return to the
current display.
To Recall a Preset Radio Station
The i-Station Tower works in conjunction with the downloaded App (i-Station Tower), which can be
downloaded via iTunes.
This Application will allow you to recall the APP radio presets on the speaker via the iPhone.
There are two ways to recall your radio stations:-
1. Using the i-Station Tower
A.
Press the 'Preset' Button on the i-Station Tower and the Program number will Appear on the
display.
OR
OR
OR