System Settings And General Functions - auna 10030313 Manual Del Usuario

System Settings and General Functions

After the wireless network is connec-
ted successfully, press the <OK> but-
ton to exit the Setup wizard and it will
enter the main menu automatically.
Go to System Setting to do other set-
ting of your radio:
Equaliser
Adjust the sound of the music suits you best. There are presets of EQ and you can also tailor your prefer style
using the "My EQ Profile Setup".
Network
• Network Wizard: To scan the wireless network available, you can select your wireless network to
connect according to the steps described above. The radio is defaulted with [DHCP] for your network.
If your network is not using DHCP configuration, please choose [Manual settings] and click [Wirel-
ess], and select [DHCP disable]. Then you can input the static IP information manually by entering
your network IP address, Network Mask, Gateway address and DNS address. Note: If you are not sure
if your network is using DHCP or not, please contact your ISP to verify.
• PBC WLAN Setup: If your wireless network router is using the WPS configuration, you can select this
option to do the connection.
• View Setting: This is to view your current network setting of your radio, such as the MAC address,
Wlan region, DHCP, SSID, IP address and Subnet mask.
• WLAN region: Select the region where you are staying at.
• Manal Settings: You can choose to set Static IP by disable the DHCP.
• Network Profile: The radio can save up to 4 wireless network setting. You can view the networks and
delete unwanted network.
• Clear network settings: You can clear all the network settings under this option.
• Keep network connected: If it is chosen to keep the network connected, the wifi remains ON when
the radio is switched to other mode of the radio.
27
www.auna.de