General Specifications - Southwire M555TP Instrucciones De Operación

Introduction
The Southwire M555TP Continuity Tester for Data Cable verifies
continuity and detects wiring faults on RJ45 terminated network
cables. With proper use, this tester will provide many years of
reliable service.
WARNINGS
• Do not connect the tester to a live circuit. Exposure to voltage
can damage the tester.
• Do not modify or try to repair the tester. No serviceable parts are
inside.
• Do not use the tester in a wet or damp environment or during
electrical storms.
• Do not use the tester near explosive gases, dust or vapor.
• Visually inspect an RJ plug before inserting it into the tester.
Poorly terminated plugs may damage the jacks on the tester.
Maintenance
This tester is designed to provide years of dependable service,
if the following care instructions are performed:
1. KEEP THE TESTER DRY. If it gets wet, wipe it off.
2. USE AND STORE THE TESTER IN NORMAL
TEMPERATURES. Temperature extremes can shorten the life
of the electronic parts and distort or melt plastic parts.
3. HANDLE THE TESTER WITH CARE.
Dropping it can damage the electronic parts or the case.
1
Maintenance cont.
4. KEEP THE TESTER CLEAN. Wipe the case occasionally with
a damp cloth. DO NOT use chemicals, cleaning solvents, or
detergents.
5. USE ONLY FRESH BATTERIES OF THE RECOMMENDED
SIZE AND TYPE. Remove old or weak batteries so they do
not leak and damage the unit.
6. IF THE TESTER IS TO BE STORED FOR A LONG PERIOD
OF TIME, the battery should be removed to prevent damage
to the unit.
General Specifications
Operating Temperature
14°F to 122°F (-10° to 50°C)
Storage Temperature
-4°F to 140°F (-20° to 60°C)
Maximum Voltage between 5V
any two pins without damage
Batteries
Two 1.5V AAA
Cable Types
Shielded or Unshielded: Cat 7, Cat 7a, Cat 6a,
Cat 6, Cat 5e, Cat 5, Car 4, Cat 3
Dimensions
4.72 in. x 2.05 in. x 1.30 in.
(12.0 cm x 5.2cm x 3.3cm)
Weight
4.81oz (136.5g)
2