What To Do If; The Spin Dryer Does Not Reach The Maximum Turning Speed Or Shakes Rather Strongly While Spinning; The Motor Does Not Run; No Water Comes Out Through The Exhaust Nozzle - Electrolux AEG SV4028 Manual Del Usaurio

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 34

What to do if ...

Certain problems are due to the lack of simple maintenance or oversights, which
can be solved with the help of the indications described below, without calling
any authorized service centre.
Switch off the spin dryer and carry out the following suggested actions.
The spin dryer does not reach the maximum turning speed
or shakes rather strongly while spinning
Stop it immediately!
1. Open the lid.
2. Re-load the laundry completely in an even way, distributing homogeneously
the weight, such it was described in, placing the laundry in the spin dryer,
or re-load evenly, but with less laundry load.
3. Put the retainer disc and close the lid.
4. Move the lever to the ON position and see the results.

The motor does not run

• Check if there is power supply in your house.
• Check if the mains cable or its plug shows visible damage. In such case, you
must call the authorized service centre for replacing it.

No water comes out through the exhaust nozzle

• Check if the exhaust nozzle is being obstructed by any kind of laundry or other
element. Try to solve this situation by yourself, if the object can be easily
removed.
What to do if
13

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Aeg sv5028C-5000sC-6100s

Tabla de contenido