Safety Labels; Important - Shindaiwa T231/EVC Manual Del Propietário

Be Aware of the Working Environment
Avoid long-term operation
in very hot or very cold
weather.
Be extremely
careful of slip-
pery terrain,
especially during
rainy weather.
If contact is made with a hard object,
stop the engine and inspect the cutting
attachment for damage.
Figure 2

Safety Labels

Safety and Operation Information Labels: Make sure all information labels are undamaged
and readable. Immediately replace damaged or missing information labels. New labels are
available from your local authorized Shindaiwa dealer.
Figure 3
4
Reduce the risk of
bystanders being struck
by flying debris. Make
sure no one is within 50
feet (15 meters)—that's
about 16 paces—of an
operating attachment.
Always make sure the
appropriate cutting
attachment shield is
correctly installed.
Be constantly alert for objects and debris that could be thrown
either from the rotating cutting attachment or bounced from a
hard surface.

IMPORTANT!

Make sure bystanders or observers
outside the 50-foot "danger zone"
wear eye protection.
50
FEET
When operating in rocky terrain or near electric
wires or fences, use extreme caution to avoid con-
tacting such items with the cutting attachment.
This label indicates the minimum
distance between front handle and
rear grip per ANSI B175.3.
T231
T231X