Honeywell True STEAM HM506 Guia De Instalacion página 5

11.5 in.
19 in.
M28711
2
Install duct nozzle.
Ensure o-ring gasket
is properly seated in
the groove.
Choose a location that has access to a:
1
• Drain with a high-temperature water
rating. Refer to local plumbing codes
to ensure proper draining.
• Cold water supply line must be used.
• Electrical circuit rated to your
humidifier.
• Vertical surface with adequate
clearances.
Slide foam gasket
down over nozzle.
duct mount InstallatIon
model
HM506
HM509
HM512
M24745
M24746A
3
TrueSTEAM Humidification System
required minimum
circuit capacity
7 Amps
10 Amps
12 Amps
Insert nozzle and twist clock-
wise to ensure tight seal of
nozzle to TrueSTEAM.
69-2285EFS—03
M24894