Teleco TVPLA868AC2 Manual Del Usaurio página 13

Activation/
deactivation of the
RAIN sensor
Change of the automatic alarm angles
4.5 1.1
Use the following procedures to change the default angles of the pergola slats associated with the wind alarm (33%) or the temperature/snow alarm (66%).
The system must have been configured and at least one transmitter memorized.
WIND
alarm angle
desired
position
TEMPERATURE
Put the slats to
the desired angle,
or SNOW
then:
alarm angle
Reset default
angles
* The buzzer will make a beep each time the button is pressed.
Deactivation
Press the "STOP" button of a
memorized 7/42 or 3-channel
transmitter for 10 s. The buzzer
emits 2 beeps. L2 flashes once
every 2 seconds.
*
x8
*
x9
*
x10
Press P1 or P2 (**) as many times as required by the type of desired memorization and hold the last time.
The buzzer emits a continuous sound.
** According to the motor control mode
STOP
L2 flashes
once every 2 s
(10 s)
P1 o P2 **
13
Activation
Press the "STOP" button of a
memorized 7/42 or 3-channel
transmitter for 10 s. The buzzer
emits a continuous sound for 4
seconds.
HOLD
(5 s)
continuous
sound
continuous
sound
continuous
sound
STOP
continuous
(10 s)
sound 4 s
complete
1 s
closing
complete
2 s
closing
3 s