Functions - Duux Tube Manual De Usuario

3. Functions

7 6 4
8 5
3 1 2
Control panel
Power
1
Change speed
2
Timer
3
Reset filter button
4
Filter replacement indicator
5
Ambient light sensor
6
WIFI mode
7
8 WIFI indicator light
10
5
007
2
PM2.5 ug/m
1 3
20⁰C 50%
4 3
LCD display
PM2.5 value
1
2 Air quality indication
3 Humidity
Temperature
4
AQI colour:
5 Green = Excellent/Good
Orange = Average
Red = Bad
Power
Press the button to switch on the device. The
welcome screen will appear for 3 seconds and the
monitoring screen will show.
Change speed
Press the button to change the wind speed
between LOW (1), MEDIUM (2), HIGH (3) and
AUTO (A). LOW speed is the most quiet and
energy efficient mode and is recommended for
areas with excellent air quality. MEDIUM speed
is recommended for areas with good/average air
quality while HIGH speed is recommended for
area's with high pollution levels. In AUTO mode
the speed will change automatically according to
the air quality measured with the PM2.5 particle
sensor. The actual air quality can be derived from
colour indication circle on display or app.
Timer
Press the button to activate a timer. Every
press will increase the timer in the following order:
1h > 2h > 4h > 8h > 0h.
Reset filter
When the indicator starts illuminating it's time
to replace your filter. After you've replaced your
filter, press and hold the button for 3 seconds
to reset the filter lifespan indicator and the
indicator will turn off.
WIFI mode
Press and hold the button until you hear a
feedback sound to enable WIFI mode. The indicator
will start flashing which means it's ready to pair
with a smartphone or tablet. After a connection
has been established, the indicator will become
solid. To reset the WIFI mode, press and hold the
button for 10 seconds.
WIFI and APP operation
Scan below QR code to download the Duux APP
or search DUUX APP in the App Store or Google
Play Store to start the procedure to download the
APP. Once installed, enter your e-mail address and
complete the registration.
APP STORE PLAY STORE
Connect to WIFI
Once registered, click "add duux device" on the
1
main screen or use the "+" button in the top
right corner to add a new device.
11