Kalorik WCL 44446 Manual De Instrucciones página 8

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

WARNING: Do not over tighten to prevent damage to the handle and
door frame).
3) Replace the door gasket to its original position.
OPERATION
CAUTION: Before connecting the appliance to an electrical power
supply, let it stand for about 4 hours. This will reduce the possibility of
malfunctioning in the cooling system due to transport handling.
Before use, clean the appliance thoroughly, especially inside the
cavity (See Cleaning and Maintenance).
Rearrange the shelves in the cavity properly if they are not correctly
placed.
Make sure that the voltage in your home is compatible with the
appliance.
Position the appliance in a cool place, on a stable surface near a
wall outlet, with sufficient clearance on all sides to allow proper
ventilation.
Avoid moist and humid spaces to store or use appliance.
WARNING: Do not store or install the appliance outdoors
WARNING: Do not attempt to install the appliance into a built-in unit!
Plug in the appliance into an earthed wall outlet.
Once connected to a power source, the fans will start turning and
the wine cooler will start cooling. The cooler will need up to one and
a half hours to reach 15°C/ 60°F and up to 4 hours to reach the
temperature set up as the factory standard.
www.KALORIK.com
8
WCL 44446 - 180330

Publicidad

Tabla de contenido
loading

Tabla de contenido