Install The Wall Bracket - Axis Q1602-E Manual Del Usaurio

AXIS Q1602-E/AXIS Q1604-E Installation Guide

Install the wall bracket

1. Use the supplied drill template to prepare a wall or pole for installation of the wall bracket.
2. Route the network cable through the wall bracket, and through the bracket adapter, keeping
the rubber gasket close to the network connector. See illustration on page 7. Leave
approximately 30 cm (11.8") of cable for connecting the camera.
3. Install the wall bracket on a wall, ceiling, or pole and make sure that the screws and plugs are
appropriate for the material (e.g. wood, metal, sheet rock, stone).
Notes:
• The weight of the camera is shown in the table below. Check that the material is strong enough to
support this weight.
Model
AXIS Q1602-E
AXIS Q1604-E
• For further technical specifications, please see the User's Manual, available on the CD included in this
package, or from www.axis.com
Weight
3.2 kg (7.2 lb.)
3.2 kg (7.2 lb.)
Page 9