Operating Instructions - Style selections 23RM2094 Manual Del Usaurio

ASSEMBLY INSTRUCTIONS
The insert (B) comes preassembled to the mantel (A).
To remove the insert (B), unscrew the screws from the
mounting brackets holding insert (B) onto mantel (A)
inside front panels. Then carefully lift and pull insert (B)
out from the back. Be careful to not slide the insert (B)
against the base of mantel (A), which could scratch the
finish.
CAUTION: Unplug insert (B) from power supply before
moving.
To install a new insert, lift the insert carefully into the back
of the unit and center it in the opening. Do not drag insert
across hearth/base as it may scratch the unit. Install the
mounting brackets to hold insert flush against the inside
of the front of mantel (A).
CAUTION: Do not plug insert into power supply until
the insert has been completely installed and mantel (A)
moved into its final location.
Move the completed unit only short distances and with
great care. It takes two people to move completed to its
final position.

OPERATING INSTRUCTIONS

TO ACCESS CONTROL PANEL
Control panel can be accessed at upper right-hand corner of insert by pushing and lifting up the
small door.
TO ACCESS CONSUMER INFORMATION
Consumer service information can be accessed at the upper left-hand corner of the electrical fireplace by
pushing and lifting the small door.
Consumer
Information
6
A
Fig. 1
B