Fellowes Galaxy 500 Manual De Instrucciones página 4

ENGLISH
STEPS TO BIND
1
1. Select the correct comb diameter
using the storage tray.
5
5. Insert the plastic comb into the
opening mechanism. Pull
comb-opening lever forward to
open the comb.
DOCUMENT BINDING
1
1. Ensure edge guide is set to
the proper document size. Punch
front and back covers first.
REMOVABLE BINDING PLATFORM
Galaxy has a unique mobile binding platform. The platform can be
lifted from the base and used on a stable surface to bind documents
using the normal binding procedure and also allows different users to
work together. When not in use, the platform should be stored safely
in the punch machine.
Satellite
SYS T EM
4
2
2. Select the correct punch
profile for the sheet size. Select
releasable dies as appropriate
(holes 15, 20, 21).
6
6. Test punch scrap sheets to check
edge guide setting.
2
Front
30
Cover
30
MAX 28
(80gsm)
Back
30
Cover
2. Punch sheets in small
batches that do not overload
the machine or the user. Ad-
just edge guide, if necessary.
®
3
3. To cancel a punch, press the
switch down at the back. Test
punch a sheet.
7
7. Load punched sheets directly
onto the open comb.
3
3. Load punched sheets directly
onto the opened comb. Starting
with the front of the document.
4
4. Select the correct back margin
depth for number of sheets.
8
8. Empty waste tray regularly
- ideally after each use.
4
4. When all punched sheets are
loaded onto the comb, push the
comb lever backwards to close
the comb and remove the bound
document.