Conceptronic C54BRS4 Guia De Inicio Rapido página 21

ENGLISH
NOTE: please make sure that the Broadband router's DHCP server is the only DHCP server available in
your network. If there is another DHCP server on your network, you will need to switch one of the DHCP
servers off.
If your computer is working in an existing network environment please write-down the settings before
altering them.
Once you have configured your Conceptronic C54BRS4 you can undo these steps.
Windows 98, ME, 2000 and XP
•
Go to the Windows control panel and double-
click on the Network icon or the Network
Connections icon.
•
Right-click on the Local Area Connection for your
network adapter and
•
select Properties.
•
In the General Tab select the Internet Protocol
TCP/IP settings for your network adapter and
click on the Properties button.
•
Select the "Obtain an IP address automatically"
button. Press OK.
•
If your computer requests to reboot, please do so.
If your computer is using an own IP
address, please write down the settings
before changing these.
If your computer is configured to use
DHCP do not modify anything.
When you are creating a new network, you
can use 192.168.2.x as IP range for your
network. All computers in your network will
get automatically the correct IP. You do not
need to do change anything.
1) Once your PC has obtained an
IP address from your router,
enter the default IP address
192.168.2.1 (broadband
router's IP address) into the
web browser of your computer.
2) The login screen will appear.
Enter the "User Name" and
"Password" and then click
<OK> to login.
Note: By default the user name is "admin" and the password is "1234". For security reasons it is
recommended that you change the password as soon as possible
See menu option:
General setup/system/password.