Conceptronic CNUMCAL2 Guia De Inicio Rapido página 12

ENGLISH
Setting CUR Function
CUR
Press the 'CUR' key for 1~1.5 sec, the 'EURO' indicator on the LCD will start flashing.
Input your desire parameter then press CUR key again. The 'EURO' indicator will
disappear; it means the setting is accomplished.
When LCD displays '0' you can press the 'CUR' to enable or disable the indicator on the
LCD. When the numerals display on the LCD. Press the 'CUR' button, and then it will
exchange to the currency or tax rate.
For example
Supposing the CUR parameter is 34 and the calculation result is 180.
The 'EURO' indicator display on the LCD: Press CUR key, then the calculate result will be
6120. The formula is (180*34).
The 'EURO' indicator didn't display on the LCD: Press CUR key, then the calculate result
will be 5.29. The formula is (180/34).
Setting Tax Function
Press '%' key for 1~1.5 sec, the 'TAX' indicator on the LCD will start flashing. Input your
desire parameter then press '%' key again. The 'TAX' indicator will disappear; it means
the setting is accomplished.
For example
Supposing the Tax parameter is 10 and the calculation result is 180.
Press Fn & Tax+ key, then the calculate result will be 198. The formula is (180*(1+0.1)).
Press Fn & Tax- key, then the calculate result will be 163.63. The formula is (180/(1+0.1))
Suppose the Tax parameter is 5
Press Fn & Tax+ key, then the calculate result will be 189. The formula is (180*(1+0.05)).
Press Fn & Tax- key, then the calculate result will be 171.43. The formula is
(180/(1+0.05))
Troubleshooting
When you turn on the keypad, if the keypad's LCD shows abnormal or nothing, check your
battery first. If the battery is working fine, try to find an acicular metal and plug into the
reset hole (in the back of the keypad). Then the keypad will work normally. If the problem
is not solved, please contact the technical support.
12