Franke PRI 5 4GAV-TC Manual De Instruccion página 15

PREVIOUS DOCUMENT
The PRI 4 4GAV model can be positioned in the center of the base (see fig. 3) when the
base is 600 wide.
f f i i g g . . 3 3
Otherwise, the hob can be positioned by centering the cooking area (see fig. 4) with
respect to the base.
f f i i g g . . 4 4
Important
These are "Y" appliances in terms of fire protection. They can be installed built-in even
near wooden walls higher than the worktop in which they are installed as long as there is
a minimum distance from the edge of the appliance equal to: 50 mm. for the side wall, 30
mm. for the rear wall and at least 700 mm from wall cabinets hung over the hob.
Connection to the gas pipeline
There are two ways of making the connection to the gas
pipeline:
A) Connect the gas hob using a dia. 12 mm rigid copper
tube as illustrated in figure 5. To guarantee a proper
seal insert the elastomer seal provided with the appli-
ance.
B) Connect the hob using a solid wall flexible steel tube.
Here, too, you must insert the seal that is furnished in
order to ensure a proper seal. We also recommend
compliance with standards regarding gas-fired appli-
ances. Check for leaks after making the gas connection.
fig. 5
15