Connectioin Of Zc-24Do; Connection Of Zc-16Di8Do - Seneca Z-8R-10A Manual Del Usaurio

In the following paragraphs you will learn how to connect a Seneca module to the Z-8R-
10A.
To connect all 24 digital outputs will need to use 3 Z-8R-10A. The picture below shows
how to connect the 24 digital outputs of ZC-24DO to the 3 Z-8R-10A with the flat cables.
Read the note below to know how to connect two Z-8R-10A together.
To connect 8 digital outputs of the ZC-16DI8DO, replicate the connection saw in the ZC-
24DO in the third Z-8R-10A.
5.4.1. Connection to ZC-24DO
To connect the 16 digital outputs
is necessary to connect two Z-8R-10A
together.
This is made possible connecting an
appropriate flat cable with 16 pins
connected from the first Z-8R-10A to
the 16 pins connector on the second
Z-8R-10A as shows in the picture.
5.4.2. Connection to ZC-16DI8DO
MI002242-I-E
The power supply
for the Z-8R-10A
must come from
the 8 (+) and 7(-)
screw terminals of
ZC-24DO.
+
24 Vdc
ENGLISH 5/8
4