Connection Of Z-10-D-Out; Correspondence Between Relays And Seneca Digital Outputs Modules - Seneca Z-8R-10A Manual Del Usaurio

To connect the Z-10-D-OUT to the Z-8R-10A use the flat cable with 16 pins
The power supply
for the Z-8R-10A
must come from
the 1 (+) and 12(-)
screw terminals of
Z-10-D-OUT.

6.0 Correspondence between relays and Seneca digital outputs modules.

Seneca's module
ZC-24DO
ZC-16DI8DO
Z-10-D-OUT
The table above shown the correspondence between the relays on Z-8R-10A and the
digital outputs came from Seneca's module.
The picture of Z-8R-10A in the following page shows the screw terminals and relays
numbering.
Digital Output
1..8
9..16
16..24
1..8
1..8
MI002242-I-E
5.4.3. Connection to Z-10-D-OUT
24 Vdc
+
Board N°
(Z-8R-10A)
1 Relay1..8
2 Relay9..16
3 Relay17..24
1 Relay1..8
1 Relay1..8
5
Relays
Correspondence
ENGLISH 6/8