Using The Battery; Connecting The Battery; Charging The Battery - LEITZ ICON Guia Del Usuario

Leitz Icon Printer User Guide

Using the Battery

An optional, external, rechargeable battery (part number 7002-00-00) is available for using the printer as a portable device.
Visit the Leitz website at www.leitz.com for information about ordering the optional battery.

Connecting the Battery

The battery connects to the back of the printer. The four guides on the battery help to align the battery for a secure
connection to the printer.
To connect the battery
Tilt the battery and slide the top hooks into the top two slots on the back of the printer as shown.
1.
Rotate the bottom of the battery downward toward the bottom of the printer until the bottom guides on the battery are
2.
aligned with the bottom two slots on the back of the printer.
Make sure the connector on the bottom corner of the battery aligns with the battery connector on the back of the
printer.
Gently press the bottom of the battery in toward the printer until the battery snaps into place.
3.

Charging the Battery

The battery charges when connected to the printer and the printer is connected to a power source. Charging pauses
temporarily during printing. The battery can be used portably for approximately 4 hours, printing up to 700 address labels,
on a single charge. The charge level of the battery is displayed in the Leitz Icon Software print pane.
To charge the battery
Connect the battery to the printer as described in Connecting the Battery.
1.
Plug the power cord into the power adapter.
2.
Plug the power adapter into the power connector on the back of the printer.
3.
Plug the power cord into an available power outlet.
4.
17
Using the Battery