LEGRAND CI-24 Manual De Instrucciones

LEGRAND CI-24 Manual De Instrucciones

Sensor de ocupación pir de 360 de bajo voltaje

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

No: 24216 – 08/16 rev. 1
Catalog Numbers • Les Numéros de Catalogue • Números de Catálogo: CI-24, CI-24-1
Country of Origin: Made in China • Pays d'origine: Fabriqué en Chine • País de origen: Hecho en China
CI-24 models ending in -U are BAA and TAA compliant (Product produced in the U.S.)
The CI-24 is a 24VAC or 24VDC Passive Infrared (PIR) occupancy sensor which integrates with HVAC or EMS systems. The CI-24
provides isolated relay contacts that are Normally Open or Normally Closed, based on occupancy.
PIR sensing systems are passive systems that react to changes in infrared energy (moving body heat) within the coverage area. PIR
sensors must directly "see" motion of an occupant to detect them, so careful consideration must be given to sensor placement.
COVERAGE PATTERNS
The CI-24 has a multi-cell, multi-tier Fresnel lens
with a field of view of 360°. The sensor has two
lens pattern options. The Extended Range Lens will
cover up to 1200 sq ft when mounted at 8-12 feet.
The High Density/Reduced Range Lens will cover
up to 500 sq ft when mounted at 8-12 feet.
Coverage shown in the diagrams below is
maximum and represents coverage for half-step,
walking motion, with no barriers or obstacles.
NOTE: Drawings are not to scale.
Extended Range Lens (Standard) - CI-24
Side View
0
8' (2.4m)
10' (3m)
12' (3.7m)
40'
30'
20'
(12.2m)
(9.1m)
(6.1m)
The effective coverage distances may be slightly less than the maximum sensing distance (see
Coverage Patterns), depending upon obstacles such as furniture or partitions, and this must be
considered when planning the number of sensors and their positioning. See the list below for
approximate coverage distances for different types of motion.
Approximate Coverage, for a Mounting Height of 8 Feet:
Lens Option
Walking Motion
Extended Range up to 22 ft radius
(1200 sq ft)
High Density
up to 12 ft radius
(500 sq ft)
The CI-24 sensor can be mounted at various heights. When mounting at heights other than 12
feet, be aware that as you decrease the mounting height, you will decrease the range and increase the
sensitivity to smaller motions. Conversely, when you increase the height, you will increase the range
and decrease the sensitivity to smaller motions. At heights of more than 12-14 feet, you may start to
significantly reduce sensitivity.
Often the best location to install a CI- 24 in a closed office is off-center (see Fig.1). Avoid placing a sensor
directly in line with an open door in which it has a clear view out, as the sensor may detect people walking
by.
For open office areas with partitions, it is best to place sensors over intersections of four workstations
(see Fig. 2).
Also avoid placing the sensors close to air ducts, as rapid air currents or the differences in temperatures may cause false activations.
For large areas of coverage use multiple sensors.
DESCRIPTION AND OPERATION
10'
0
10'
20'
(3m)
(3m)
(6.1m)
Workstation
(Hand Motion)
12ft radius
(500 sq ft)
9ft radius
(300 sq ft)
Wattstopper
360° Passive Infrared Low Voltage Occupancy Sensor
IRP 360 ° Détecteur de présence de basse tension
Sensor de ocupación PIR de 360° de bajo voltaje
Installation Instructions • Instructions d'Installation • Instrucciones de Instalación
Voltage ................................................. 24VAC or 24VDC, ±10%
Current Consumption .................................. 60mA Max @24VAC
Isolated Relay Rating ............................... 1A @24VDC or 24VAC
Operating Temperature .........................32° to 131°F (0° to 55°C)
Time Delay Adjustment ...........................30 seconds–30 minutes
PIR Coverage
Sensitivity Adjustment ....................................Minimum/Maximum
UL & CUL Listed
CI-24
Top View @ 8ft
High Density/Reduced Range Lens CI-24-1
Side View
0
8' (2.4m)
10' (3m)
12' (3.7m)
30'
40'
20'
(9.1m)
(12.2m)
(6.1m)
PLACEMENT
®
SPECIFICATIONS
............................................................ 20mA Max @24VDC
Model CI-24 .......................................................up to 1200ft
Model CI-24-1 .....................................................up to 500ft
CI-24-1
Top View @ 8ft
15'
10'
5'
0
(4.6m)
(3m)
(1.5m)
2
2
5'
10'
15'
20'
(1.5m)
(3m)
(4.6m)
(6.1m)
Fig. 1 Closed office
Fig. 2 Open office

Publicidad

Tabla de contenido
loading

Resumen de contenidos para LEGRAND CI-24

  • Página 1 UL & CUL Listed DESCRIPTION AND OPERATION The CI-24 is a 24VAC or 24VDC Passive Infrared (PIR) occupancy sensor which integrates with HVAC or EMS systems. The CI-24 provides isolated relay contacts that are Normally Open or Normally Closed, based on occupancy.
  • Página 2: Dip Switch Settings

    INSTALLATION A 4-S junction box can be used with a 3” mud-ring when local building codes mandate that low voltage connections be contained in a junction box. Otherwise a 3” mud-ring or the provided ceiling attachment ring can be used. IMPORTANT: If the lens will be masked, the junction box or mud ring may need to be positioned so that the mask is oriented properly when the sensor is installed (see Masking).
  • Página 3: Troubleshooting

    INSTRUCTIONS EN FRANÇAIS CARACTÉRISTIQUES TECHNIQUES DESCRIPTION ET FONCTIONNEMENT Le CI-24 est un détecteur de présence à infrarouge passif (IRP) Voltage ..........24VCA ou 24VCC, ±10% de 24 VCA ou 24 VCC qui s’intègre aux systèmes CVCA ou SGE. Consommation actuelle ........ 60mA Max à 24VCA Le CI-24 dispose d’un relais isolé...
  • Página 4: Instructions De Câblage

    (12 pi) (46 m² [500 pi²]) Le détecteur CI-24 peut être monté à différentes hauteurs. Lorsque vous le montez à des hauteurs autres que 3,6 m (12 pi), sachez que si vous baissez la hauteur de montage, vous diminuez la portée et augmentez la sensibilité...
  • Página 5: Dépannage

    RÉGLAGES DE L’INTERRUPTEUR DIP N° d'interrupteur DIP 1 2 3 4 Temporisations 30 secondes 10 minutes 20 minutes 30 minutes Sensibilité Maximum Minimum ON DIP Service Service Contrôle par Normal interrupteur DIP = MARCHE = ARRÊT pour la temporisation, = Préréglages en usine la sensibilité, et l'entretien RÉGLAGE DU DÉTECTEUR Le détecteur est préréglé...
  • Página 6: Descripción Y Funcionamiento

    9 pies de radio (300 pies cuadrados) pies cuadrados) El sensor CI-24 se puede montar a varias alturas. Cuando vaya a realizar en montaje a otras alturas mayores a 12 pies, tenga en cuenta que a medida que disminuye la altura, disminuye el alcance y aumenta la sensibilidad a movimientos más pequeños.
  • Página 7: Instalación

    INSTALACIÓN Una caja de conexiones 4-S se puede usar con un anillo empotrable de 3 in cuando los códigos de construcción locales obligan que las conexiones de Cielo raso bajo voltaje estén contenidas en una caja de conexiones. De lo contrario, se Orificio de 2-3/4”...
  • Página 8: Configuración Del Interruptor Dip

    No. 24216 – 08/16 rev. 1 © Copyright 2016 Legrand All Rights Reserved. 800.879.8585 © Copyright 2016 Tous droits réservés Legrand. www.legrand.us/wattstopper © Copyright 2016 Legrand Todos los derechos reservados.

Este manual también es adecuado para:

Ci-24-1

Tabla de contenido