Baby Jogger city go PD348959F Manual De Instrucciones página 34

SEAT INSTALLATION - LAP/SHOULDER BELT ONLY
4
5
6
4 Pull on shoulder portion toward the
retractor while pressing down on the
center of the carrier to tighten carrier to
vehicle seat.
5 Test For Tightness. Grab the sides of the
car seat where the seat belt is and push
and pull the car seat from side to side
and front to back. If the car seat moves
less than 1" (2.5 cm), it is tight enough.
6 After installing the carrier without base,
check the red level line on the label
beneath the handle to make sure that it
is level with the ground.
34