Celestron 44301 Manual De Instrucciones página 7

Photo Booth on a Mac, go to your hard drive and click on Applications.
Choose Photo Booth from the list of applications. If a camera is already
attached to computer, Photo Booth will show up as your default.
You will need to change this to "Celestron Microscope." You will
then be able to take photos with your microscope using the capture
button. Please note: Many keyboards on Macs have a USB port. The
microscope will not work through this USB port because it does not
have enough power. You will have to connect the USB directly to your
computer tower.
When viewing or imaging, you can change the orientation of the image on the
computer screen by rotating the microscope to the position you desire.
I
nStallIng the
S
oftware
Your microscope comes with the Digital Microscope Suite CD-ROM which
allows you to use your microscope for visual purposes and for imaging with
your computer when using Microsoft Windows OS's.
Before installing the software, remove the USB cable of the Digital Camera
from your computer and do not connect it until the software installation
is complete. Insert the CD-ROM into your CD-ROM drive and it should
automatically begin. Messages will appear (each operating system may show
something somewhat different) to guide you through the installation process.
If the software did not begin automatically, double click on "My Computer"
and right click the CD-ROM icon and it should start.
d M
IgItal IcroScope
S
uIte
6
(dMS)