Connect Power Cord - RS Pro RSDM3055 Serie Inicio Rápido

Connect Power Cord

Before connecting the instrument to a power source , please
select the AC voltage selector on the rear panel of your
multimeter according to the power supply.Then connect the
power cord as shown in the following figure.
Connect Power Cord
Press the Power key on the front panel to start up the
multimeter.
If unable to start up the multimeter, take the follow steps:
1. Check the power cord connection.
2. After the inspection, if the power key is not lit, please take
out the fuse and check, refer to the fuse specification shown
in the User Manual to change the fuse if needed.
4. After the above inspections, the power key is still not lit,
please contact Sales for help.
14