Zyxel Prestige 334 Guia De Inicio Rapido página 5

LED STATUS
Green
LAN 1- 4
Green
Amber
WAN
Green
Amber
3 Preparing Your Computer
Skip this section if your computer is already set up to accept a dynamic IP
The Prestige is already set up to assign your computer an IP address. Use this section to set up your computer
to receive an IP address or assign it a static IP address in the 192.168.1.2 to 192.168.1.254 range with a
subnet mask of 255.255.255.0. This is necessary to ensure that your computer can communicate with your
Prestige.
Your computer must have an Ethernet card and TCP/IP installed. TCP/IP should already be installed on
computers using Windows NT/2000/XP, Macintosh OS 7 and later operating systems.
3.1 Windows 2000/NT/XP
1. In Windows XP, click start, Control Panel. In Windows 2000/NT, click Start, Settings, Control Panel.
2. In Windows XP, click Network Connections.
In Windows 2000/NT, click Network and Dial-up Connections.
3. Right-click Local Area Connection and then click Properties.
4. Select Internet Protocol (TCP/IP) (under the General tab in Win XP) and click Properties.
COLOR
On The Prestige is receiving power.
Blinking The Prestige is performing testing.
Off The LAN is not connected.
On The Prestige has a successful 10Mb Ethernet connection.
Blinking The Prestige is sending/receiving data
On The Prestige has a successful 100Mb Ethernet connection.
Blinking The Prestige is sending/receiving data
Off The WAN connection is not ready, or has failed.
On The Prestige has a successful 10Mb WAN connection.
Blinking The Prestige is sending/receiving data
On The Prestige has a successful 100Mb Ethernet connection.
Blinking The Prestige is sending/receiving data
address. This is the default for most new computers.
P334 ENGLISH
4
DESCRIPTION