Latch.REmoval.&.STorage; Shoulder.BElt.LOckoff - Chicco KeyFit 30 Manual De Instrucciones

LATCH REMOVAL & STORAGE
This Child Restraint can be safely installed using vehicle
belts or LATCH. LATCH is a Child Restraint attachment
system that is standard in most vehicles manufactured
after September 1, 2002. Refer to your vehicle owner's
manual for details regarding LATCH use in your vehicle.
Removing LATCH:
.Pull LATCH Connectors.out.of.
1
storage.pockets.while.lifting.up.on.
LATCH.Release.Lever.
Storing LATCH:
.Insert LATCH Connectors.into.
2
storage.pockets.
.Pull LATCH Pull Strap.to.
3
secure.LATCH.Connectors.
.Roll LATCH Pull Strap.and.
4
store.in.Pull.Strap.Storage.Pocket.
When not using LATCH, the LATCH Connectors and Pull
Strap MUST be stored properly to allow Carrier to attach
securely to Base.
1
2
3
4
14
SHOULDER BELT LOCKOFF
The Shoulder Belt Lockoff is used when installing the Base using
your vehicle belts. It locks the vehicle shoulder belt in place,
ensuring a stable, secure Base installation.
.Do not put the shoulder belt.
1
in.the.locked.mode.
.With vehicle belt tight,.position.
2
the.shoulder.belt.under.the.
Shoulder.Belt.Lockoff.that.is.on.the.
opposite.side.of.the.buckle.
.Firmly slide shoulder belt.
3
under.the.lockoff...(Optional:..Once.
the.base.is.installed.tightly,.the.
shoulder.belt.can.be.put.in.the.
locked.mode...See.vehicle.owner's.
manual.or.label.on.seat.belt.for.
more.information.)
Refer to "Installation Using
Vehicle Belt" on page 32 for
detailed installation instructions.
1
2 3
15