Work Pro WPE 26N Guía Rápida página 13

WPE 26N (Feedback & Presets)
Presets
WPE 26N has 15 user presets available for recording settings that can be quickly accessible.
The interface displays a dropdown with 15 presets that can be renamed.
The Execute button allows trigger the preset after selected it.
The Store Preset button allows to save the settings in the selected preset
The keys Copy / Paste made ? ? a complete copy of the selected preset
LIVE mode is enabled when selected a physical device, thus launching a preset stored or act directly with the
unit .
Push and Pop buttons allow you to create a virtual point of backup in the event of on live preparation or
required a puctual change in one of its parameters returning immediately to the previous state.
Simply click Push. That point will be established backup and now can modify any characteristic.
At the time you want to return to the previous state, click Pop
WPE 26N (OSC Commands)
Each modification on any parameter: level variation, creating filter, limiter adjustment, etc., makes an OSC command
that is shown in HISTORY OSC tab thus is possible to copy this command to generate a command list for any interface
that will allow OSC commands to execute such orders.
The icons on the left side let you copy to the clipboard chain and the last icon set string format, either alone or using both
in hexadecimal and ASCII hexadecimal choosing character that is configured in the chain.
NOTE: The central icon is only operating in Digiline devices
Quick Guide
- 12 -
WPE 26N
www.work.es