Clarke Technology ALTO FUSION 20I Manual De Instrucciones página 6

WARNING: Maintenance and repairs performed by unauthorized personnel could result in damage or
injury. Maintenance and repairs must be performed by authorized Clarke Technology
personnel only.
WARNING: Electrical components of this machine can "short-out" if exposed to water or moisture.
Keep the electrical components of the machine dry. Wipe the machine down after each
use. For storage, keep the machine in a dry building.
WARNING: Operating a machine without observing all labels and instructional information could result
in injury or damage. Read all machine labels before attempting to operate. Make sure all
of the labels and instructional information are attached or fastened to the machine. Get
replacement labels and plates from your Clarke Technology distributor.
WARNING: Use only commercially available floor cleaners and waxes intended for machine
operation. Do not use flammable materials.
CAUTION:
When cleaning, servicing or maintaining the machine, replacing parts or converting to
another function, the power source should be switched off. Mains operated machines
should be disconnected by removing the power plug. Battery operated machines should
be disconnected by removing the key of the power switch, or any other effective means.
CAUTION: Use of this machine to move other objects or to climb on could result in injury or damage.
Do not use this machine as a step or furniture. Do not ride on this machine.
CAUTION: Your machine warranty will be voided if anything other than genuine Clarke Technology
parts are used on your machine. Always use Clarke Technology parts for replacement.
Page -6- CLARKE TECHNOLOGY Operator's Manual -Fusion 20 Burnisher