Philips Lumea BRI864 Manual Del Usuario página 143

Tipo de pele
I
4 Press the on/off button again to confirm that
you want to use the suggested setting advice to
start using the device.
Philips Lumea will automatically use the highest
suggested intensity, indicated by a continuous
green light.
Lumea gives you the freedom to select the light
intensity that you find most convenient. If you
want to set the light intensity setting manually,
please consult the table below.
Nota: The device automatically disables when
your skin tone is too dark, to prevent you from
developing skin reactions. The 'ready to flash'
light will blink orange to indicate if the skin tone
is too dark.
5 O Lumea nunca deve ser doloroso. Caso você
sinta desconforto, reduza o ajuste de
intensidade da luz. You can do this by using the
on/off button.
6 After moving to another body area or recent
tanning, perform a skin test to determine the
right light intensity setting. To re-activate the
setting advice feature, turn off the device off by
pressing the on/off button for 2 seconds, and
turn the device back on by pressing the on/off
button shortly.
Nota: Since body areas might differ in skin color,
you need to select the right setting for each
body area separately. The Philips Lumea does
not automatically select the correct setting.
Tom de pele
Branca: você sempre
se queima e nunca
fica com bronzeado.
Português do Brasil
Ajuste de intensidade
da luz
4/5
143