Steelcase Workplace Advisor Subscription Instrucciones De Instalación página 5

®
CONNECTION
1. Locate PoE network connection for gateway.
2. Connect the PoE network cable to the LAN port on the gateway.
3. The gateway may take several minutes to check network port connections.
All network connections are working properly when the LED light stays solid green.
Please see the table below if the LED light does not turn solid green after several
minutes to determine which network port is not working properly.
LED Status Indicators - Gateway
LED Color and Blink Pattern
Solid Yellow
Cycle through red, yellow,
green (1 sec each)
Blinking red
Blinking red and yellow
Blinking green and yellow
Blinking green
Solid green
Blink green on 1 sec, red
on 1 sec for 20 minutes
or disabled by WPA/PA
Solid red
Description
Boot Sequence
Booting kernel
Kernel started successfully, executing startup scripts
Waiting for IP address (DHCP)
Waiting for network time (NTP - Port 123)
Connecting to SBS servers (MQTT - Port 8883)
Connecting to Steelcase servers (MQTT - Port 8883)
Connected to Steelcase servers, all ports
correctly configured.
Troubleshooting Indicators
Find me (triggered from WPA/PA)
Critical fault (security fault).
NOTICE
Ensure that cable is inserted firmly.
Connection
Activity
Page 5 of 23
1083747001 Rev D