UTC Fire & Security interlogix TruVision TVC-BIR6-MR Guida Rapida página 15

Installation
When installing the camera, please use the
mounting bracket.
To install the camera:
1. Using the mount as a template, place it
level against the mounting surface and
mark the position of the mounting holes.
2. Following all local codes, drill and
prepare the mounting holes.
3. Securely fasten the mount to the
mounting surface with the appropriate
fasteners.
4. If needed, seal all mounting holes so that
no moisture can leak into the mounting
surface.
5. Screw the camera into the mounting
bracket. Ensure that the camera is firmly
attached to the bracket.
13 EN