Publicidad
Idiomas disponibles
Idiomas disponibles
3.
Attach hinges (#9) to strut tubes as shown in figure
3. With hinge positioned as shown, align hole in
hinge with hole in strut tube and attach with ¼-20 x
2" bolt #28, ¾" spacer #29 and hand knob #30.
Tighten knob securely. Repeat for other hinge.
CAUTION: Hinges must be positioned exactly
as shown or table will not operate correctly
and could be damaged.
4.
With two adults, put other table half onto other strut
tubes following instructions in steps 2 and 3.
CAUTION: Hinges must be positioned
exactly as shown or table will not operate
correctly and could be damaged.
28
9
30
29
14
9
28
4
DO NOT OPEN THE TABLE TO PLAYING POSITION
UNTIL BOTH TOPS ARE INSTALLED! DO NOT LEAVE
TABLE STANDING UNATTENDED. IT COULD BE
KNOCKED OVER CAUSING SERIOUS BODILY INJURY
OR PROPERTY DAMAGE.
5.
Attach Corner Protectors (#23) to table corners as
shown in Figure 3. Push snap tabs on Corner
Protectors into holes in rails. Be sure tabs are
aligned with holes before pushing
aligned with holes before pushing
aligned with holes before pushing
break tabs if they are not aligned correctly.
Figure 3
23
30
29
Be sure tabs are
Be sure tabs are
. You could
23
9
28
29
Strut
Tube
30
Publicidad
