Publicidad
Idiomas disponibles
Idiomas disponibles
3. Product details
Bean container
Start/Stop button
Grinding time control
Coffee container
4. Getting started
Take the device out of the box and remove any packaging remnants. Clean the
device and the supplies as described under "Clean and Care". Place the mill on an
even surface. Put the bean container on the bean hopper holder. Make sure to
align the tab on the bean container with the groove on the bean hopper holder
and then turn the bean hopper clockwise until it is tightly locked into the bean
hopper holder. When disassemble, press down the bean hopper holder release
button and simultaneously turn the bean container anti-clockwise to remove the
bean container from bean hopper holder.
The bean hopper is assembled with a security switch. The device will only work if
the bean hopper is inserted correctly into the bean hopper holder. Please ensure
to not fill in more than 350g of coffeebeans.
English
Lid
Bean hopper holder
Lock button
Grinding control
Base
Coffee powder outlet
19
Publicidad
