Publicidad
EN
OPTION 2: MANUAL OPERATION
Positional diagram 5
Positional diagram 6
05. Use the supplied Handle to flare
manually.
07. Turn the handle anti clockwise to return the flaring head to original position. Then release the side bar to
move the Yoke to the back. Open the Bar to remove the flared tube.
NOTE: AFTER SOME USES, CLEAN THE DEBRIS OFF THE ECCENTRIC CONE TO ENSURE THE
SMOOTHNESS OF THE CONE. ALSO, USE LUBRICANT AT THE THREAD TO LUBRICATE AND
PREVENT RUST FOR LONGER LIFESPAN.
Positional diagram 3
Positional diagram 6
OR
Positional diagram 7
06. Remove the side bar and use the Yoke
to flare manually.
4
Positional diagram 4
Positional diagram 7
Publicidad
