Program Function - auna KaraBanga Manual Del Usario

This function allows music tracks to be played in a programmed sequence .
NOTE: Program function can only be set in STOP mode
1 . Press the PROGRAM button once . Program Number 01 will display and PROGRAM INDICATOR will
flash.
2 . Press the SKIP FORWARD or SKIP BACKWARD button to select the track to be programmed .
3 . Press the PROGRAM button again to store the selection . The Program number . will advance to 02
to prompt for the next input .
4 . You may repeat steps #2 to #3 to program up to 20 tracks . As soon as you have entered the 20th
track, the LCD DISPLAY will show "FU", indicating that program is full .
5 . Press the PLAY button to complete and start program play . Press STOP button to stop program
play .
6 . You may use the REPEAT function to repeatedly play a certain track (Repeat 1) or all tracks (Repeat
All) in the Program Play Mode .
7 . The CD player will stop when all the programmed tracks have been played through once . To repeat
program play, press the PLAY/PAUSE button .
8 . To cancel program play, press the STOP button twice while program play is running or open the CD
DOOR in stop mode .
Up to 20 tracks can be programmed .
If you attempt to program more than 20 tracks, "FU" will appear in the LED DISPLAY and "PROG FULL"
will appear on the TV screen as shown below (if connected) .
Program Play mode
When finished programming, tap PLAY BUTTON to confirm and start program play. The PROG
INDICATOR in the LED DISPLAY will light . While playing, you may tap the NEXT or PREV BUTTON to
skip to a desired song in the program list .
To stop program play temporarily, tap the STOP BUTTON once . The PROG INDICATOR in the LED
DISPLAY and TV screen (as shown below) will remain ON .

PROGRAM function

31