Create A Scenario; Creating A Scenario; Exiting The Association Mode - DELTA DORE TYXIA 253 Manual Del Usuario

Starting up

Create a scenario

On the TYXIA 253, press and
release the Select. button to
select the scenario association
screen.
Set the receiver(s) to the
required state (blinds lowered,
lights on at 70%, etc.).
Next, set the receivers to
association mode (see their
respective guides).
On the TYXIA 253, press the
or scenario button.
Check that the receiver LEDs
are no longer flashing.
Exit the association mode
Press the Select. button for 5 seconds.
EN
- 80 -
Select.
Via an X2D receiver
70%
Select.