SOUNDMASTER ICD3030 Manual De Instrucciones página 29

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 109
3. Auto update
The time and date can be updated manually or automatically from DAB, FM or network.
Auto update works with data sent over DAB, FM or the Internet. The clock is only updated
when it is in a corresponding mode, so it is suggested to select a mode you use regularly.
DAB and FM use time signals broadcast with radio transmissions. Network uses a time
signal sent from the Internet radio portal when in any network connected mode.
4. Time zone/daylight
Set your time zone. If your country uses daylight saving and it is in effect, turn on the
Daylight saving option. (only available when Auto update from Internet is selected).
5. Manual update
If you set No update, the wizard prompts you to set the time and date manually. The date
and time are displayed as dd-mm-yyyy and hh:mm.
The active value appears as flashing. Adjust each value with the "NAVIGATE" knob. Once
the value is set, press the knob to continue setting with next value.
6. Network
Keep Network connected
Select this option when the unit should the network connection in standby keep, when the
function is confirmed, the unit wills faster connecting the internet and it is possible to switch
on the unit with the "UNDOK" app.
Note: The standby power consumption is slightly increased with this function.
WLAN region
Select the WLAN region to obtain the optimal WLAN connectivity: Europe.
Scanning for the network
ICD3030 is compatible with all common network protocols and encryption methods. It
searches for the available networks and list them out for you.
There will be hints for the type of network – if your network devices support WPS function, it
will be [WPS] before the SSID (the name of the network device). Select the one you want to
connect.
For the wireless connection, you will be asked for input the
encryption in the next step. To enter the network's key, use the
"NAVIGATE" knob to move the cursor through the characters and
press "OK" to confirm. As each character is selected, the key is built
up near the top of the display.
There are three options accessible by tuning the navigate reel back
before the first characters – Backspace, OK and Cancel.
ICD3030 / English Instruction Manual
5

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido