Bluetooth - SOUNDMASTER ICD3030 Manual De Instrucciones

To fine tune press the "
The unit search in 0.05 MHz steps.

Preset
To store an FM radio preset, press and hold the "PROGRAM" button on Remote Control until
the display shows the "Save preset" screen. Select one of the 40 presets to save the current
station and press "OK" to confirm.
To select a preset, press the "PROGRAM" button on Remote Control, then select one of the
listed preset stations and press "OK" to confirm. Or press 0 to 9 on the Remote Control to
directly recall the presets.

Now playing information
While the stream is playing, the screen shows its frequency, or if RDS signal is available, station
name and any further RDS information such as program name, title and other details. Stereo
broadcasts are indicated with an icon at the bottom of the screen. To view further information,
press Info button on the radio.
Each time you press "INFO" button on the radio, another set of information is displayed, cycling
through Radio text, program type, frequency and today's date
SETTINGS

Scan settings
Choose FM at first, it will go to a specific station playing. Then press "MENU" on the radio to get
above table.
By default, FM scans stop at any available station. This may result in a poor signal-to-noise ratio
(hiss) from weak stations. To change the scan settings to stop only at stations with good signal
strength, select "Yes" after choosing Strong station only.

Audio settings
All stereo stations are reproduced in stereo. For weak stations, this may result in a poor signal-
to-noise ratio (hiss). To play weak stations in mono, select FM weak reception: Listen in mono
only and then YES.
When you select the Bluetooth mode, the device is entering to
pairing and the BT icon at the bottom of the screen will flash.
Turn on your smartphone, tablet or other Bluetooth devices to
search for the device.
The Bluetooth pairing name is "ICD3030".
" or " " button on the Remote Control.

BLUETOOTH

ICD3030 / English Instruction Manual
.
15