Assembly And Preoperation - Campbell Hausfeld PW1625 Manual Del Usuario

Assembly and Preoperation

Always make sure that
the garden hose is turned on before turning on
the pressure washer. Running the pressure washer without water will
damage the pumps seals.
Do not disassemble the lance or gun on this
pressure washer. Replacement parts are not available for the gun or
lance.
PW1625:
1. Attach cord holder (see Figure 7).
2. Attach high pressure hose to gun (see Figure 11).
3. Attach lance to gun (see Figure 12).
4. Attach garden hose to unit (see Figure 14 and 15).
5. Attach high pressure hose to high pressure outlet
PW1825:
Figure 7 - Attach cord holder (PW1625 only)
1
2
5
Figure 8 - PW1825 only
7
Figure 9 - PW1835 only
Figure 10 - Attach soap tube to unit (models
PW1825 and PW1835 only)
6
Figure 11 - Attach high pressure hose to gun
(all models)
Figure 12 - Attach lance to gun.
9
8
Models: PW1625, PW1825, PW1835
1. Slide handle (1) onto unit (see Figure 8).
2. Attach with 2 phillips screws.
3. Slide hose hook (6) onto front of pressure washer.
4. Attach with 2 phillips screws.
5. Slide soap tank (5) into handle.
6. Attach soap tube to unit (see Figure 10).
7. Attach high pressure hose to gun (see Figure 11).
8. Attach lance to gun (see Figure 12).
9. Attach garden hose to unit (see Figure 13 and 15).
10. Attach high pressure hose to high pressure outlet (see Figure
16).
Figure 13 - Attach garden hose to unit (model
PW1825)
Figure 14 - Attach garden hose to unit (models
PW1625 and PW1835)
5
Water inlet
www.campbellhausfeld.com