Memory Recall; Clock Setting; Alarm Setting - THOMSON CL300P Modo De Empleo

MANUAL PRESETTING RADIO STATIONS
1. Receive the desired radio station as in the previously procedure.
2. Press and hold the PRESET/PLAY/PAUSE button for 3 seconds. "P 01" will blink on the display.
Press the or
station to. Then press the PRESET/PLAY/PAUSE button again to store it.
3. Repeat the same procedures until all the desired radio stations are stored into the program list.

MEMORY RECALL

Recall the stored frequencies by pressing the PRESET/PLAY/PAUSE button repeatedly to select
station 1 to 10 as desired

CLOCK SETTING

In standby mode
1. Press the SET button. The hour time will blink on the display
2. Press the or
3. After the desired hour is reached, press the SET button and the MINUTE time will blink.
4. Press the or
5. After the desired minute is reached; press the SET button to confirm.

ALARM SETTING

AL1: Alarm 1 indicator
AL2: Alarm 2 indicator
Zz: Snooze indicator
Note: Alarm 1 & Alarm 2 indicator will appear on LED display once the corresponding alarm function
is activated
In standby mode
1. Press & hold the VOL+/AL1 button for 3 seconds until the alarm hour digit is blinking.
2. Press the or
3. After the desired HOUR has been reached, press the VOL+/AL1 button and the MINUTES will
blink.
4. Press the or
5. After the desired minutes have been reached; press the VOL+/AL1 button
6. Press the or
"buzz & light", "FM & light", "USB & light".
• Alarm by buzz
• Alarm by FM radio
• Alarm by USB
• Alarm by light
• Alarm by buzz & light
• Alarm by FM radio & light
• Alarm by USB & light
7. Press the VOL+/AL1 button to confirm
button repeatedly to select the program number (01-10) you want to store the
button to adjust the HOUR.
button to adjust the MINUTES.
button to adjust the HOUR.
button to adjust the MINUTES.
button to select the alarm source, such as "bp", "FM", "USB" , "light",
- EN 5 -