HAMPTON BAY 280-706 Manual De Instrucciones página 4

PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):
4ea Side Glass Panels (#6) 1ea Bottom Glass Panel (#7)
ASSEMBLY INSTRUCTIONS:
1. Carefully unpack the fixture. Lay out all parts on a clean surface.
2. Place the Bottom Glass Panel (#7) into the bottom of the Fixture Frame
(#8), then use the bottom Clips (#10) to secure the Bottom Glass Panel (#7).
Place the four Side Glass Panels (#6) into the four sides of the Fixture
Frame (#8), then use the top and bottom Clips (#10) to secure the Side
Glass Panels (#6).
3. Before continuing Assembly, please proceed to the Installation Instructions.
4. Install two 60 watt medium base incandescent light Bulbs (#5) (not
included) or two equivalent standard base compact fluorescent light bulbs
(not included) in the Sockets (#3) in the fixture.
5. Place the Fixture Frame (#8) over the Canopy (#1). Align the Screws (#2)
on the Canopy (#1) to protrude through the holes on the top of the Fixture
Frame (#8). Secure the Canopy (#1) into place by screwing the two Lock
Nuts (#9) onto the two protruding Screws (#2).
Page 4
1ea Fixture Frame (#8) 2ea Lock Nuts (#9)
ASSEMBLAGE:
Page 21