Denon SYS-76HT Instrucciones De Operación página 14

ENGLISH
USING THE ACTIVE SUBWOOFER (DSW-76)
1. Set the power switch to the "ON" position.
• When the unit's power supply cord is plugged into a switched AC outlet on the AV surround receiver (or
amplifier), if the power switch is left at the "ON" position, the unit's power turns on and off automatically when
the AV surround receiver's (or amplifier's) power is turned on and off.
• If the power supply cord is not plugged into a switched AC outlet on the AV surround receiver (or amplifier), set
the unit's power switch to the "ON" position after turning on the AV surround receiver's (or amplifier's) power.
When turning the power off, set the unit's power switch to the "OFF" position before turning off the AV
surround receiver's (or amplifier's) power.
2. Adjust the volume using the volume adjustment control.
For details, see "Part Names and Functions".
REMOVING THE SPEAKER NET (SC-A76, SC-C76)
The net on the front of the speaker systems (SC-A76, SC-C76) can be removed.
• To remove, grasp both sides of the net and pull forward.
• To mount, line up the holes in the four corners of the speaker net with the projecting pieces in the four corners of
the cabinet and press in.
8
ENGLISH